Menu c, Creen, Ontrols – Philips 25TS54C User Manual

Page 4: Continued, Able, Hannel

YES

CABLE

CHANNEL
SLEEP
CAPTION
VOL. BAR
EXIT

OWER

ENU

MUT

SUR

VOL

SMART

SLEEP

OTE: If you went
through First Time Setup

(page 3), this task has already
been completed for you.

You need to make sure that
the TV is set to pick up either
Cable TV stations or Antenna
signals. In other words, the
TV needs to know whether
you have connected a Cable
TV signal or a normal anten-
na to its ANTENNA plug (see
page 2).

ABLE OR

NTENNA

NPUT

Press the MENU (M)

button on the remote, then the
CHANNEL ▲ or ▼ buttons
(or press the MENU ▲ or ▼
on the TV) to select the word
CABLE with the TV’s on-
screen Arrow.

Press the VOLUME (+)

or (-) buttons (on the TV or the
remote) to select either:

YES-

If you DO have Cable
TV connected to the
TV. Channels 1-125
can be selected.

NO- If you have an Antenna

connected to the TV.
Channels 2-69 can be
selected.

BEGIN

Try it out.
Press the CHANNEL
▲▼ buttons and scan
the channels. CH▲▼
works only after STA-
TUS button is pressed
to clear the screen (or
Menu times out -
about 1 minute.)

Remember, to set the
TV to select the chan-
nels on your Cable
system, or in your
area, see the
"Autoprogram" steps
in the SETUP section
on page 3, and
“Adding Channels ” in
the section below.

MART

ELP

-S

CREEN

MENU C

ONTROLS

(

CONTINUED

)

Press STATUS button on

the remote control to clear the
screen.

SAVED

CHANNEL

SLEEP
CAPTION
VOL. BAR
EXIT
SETUP

OWER

ENU

MUT

SUR

VOL

SMART

SLEEP

DELETED

uto-Program (see page 3)
adds all the channels it

can find (on your Antenna or
Cable TV system) into the
TV's memory. Save/Delete
channels makes it easy for
you to add other channels, or
drop unwanted channels,
from the list of channels in
the TV's memory.

ELETE

HANNELS

Press the MENU (M)

button on the remote, then the
CHANNEL ▲ or ▼ buttons
(or the MENU ▲ or ▼ on the
TV) to select the word CHAN-
NEL with the TV’s on-screen
Arrow.

Press Channel Number

buttons on the remote (or
CHANNEL ▲▼ buttons on the
TV) to select the channel you
want to SAVE (or DELETE.)

BEGIN

Press the VOLUME (+)

button to SAVE the selected
channel number into memory.

Press (-) button to DELETE a
channel from memory.

Press the STATUS button

to clear the screen after adding
(or deleting) all the channels
you want.

ABLE

HANNEL

To SAVE a channel above 100, use the CH

▲▼ buttons on the TV. The remote number

buttons only go up to channel 99.

ALT. CHN.

SURF

SMART SND
STEREO
INPUT
CABLE
CHANNEL

OWER

ENU

MUT

SUR

VOL

SMART

SLEEP

SURF

series of up to eight pre-
viously viewed channels

can be selected from the
SURF button on your remote
control. With this feature you
can easily switch between
different TV programs that
currently interest you.

HANNEL

URF

Press the MENU (M)

button on the remote, then
press the CHANNEL ▲ or ▼
(or the MENU ▲ or ▼ buttons
on the TV) to select the word
SURF with the TV’s on-screen
Arrow.

Press the VOLUME (+)

or (-) buttons to select the
ALT. CHN.(Alternate Channel)
or SURF. See the Smart Help
section (to the right) for an
explanation on the use of ALT.
CHN. and SURF features.

BEGIN

Remember, to use
ALT. CHN., first select the
desired channels with the
number buttons on the
remote. (For example: 11,
and 22.) Then press the
SURF button on the
remote to quickly toggle
between the two channels.

The Surf control will allow
up to eight channels to be
put into the “SURF
Memory.” Enter the num-
ber of the desired channel;
then press the SURF but-
ton to add it into the SURF
Memory. (Example: With
the SURF control selected
in the Menu, you press
channel 02, then the Surf
button (while the channel
display is still visible on-
screen) to add channel 02
to the Surf memory.
Repeat for up to 8 chan-
nels.

MART

ELP

Press STATUS button on

the remote control to clear the
screen.

URF

ALT. CHN. (Alternate Channel) -
Current and one previous channel.

SURF - Up to eight channels in a
channel Surf ring.

MART

ELP

NOTE: You can also add the VCR/AUX mode (see page 7) into the TV's
channel memory. Then you can quickly select the Audio/Video Input jacks
on the rear of the TV by pressing the Channel ▲▼ buttons.

To “SAVE” the VCR/AUX mode onto the TV’s channel memory:

•

With the on-screen menu displayed, press the CH ▲ or ▼ button and
select the INPUT control.

•

Press the (+) or (–) button to place the TV in the VCR/AUX mode.

•

Press the CH ▲ or ▼ button to reselect the CHANNEL control.

•

Press the (+) button to “SAVE” VCR/AUX mode into the TV’s channel
scan memory.

•

Press the STATUS button to clear the Menu from the screen.

Try it out. Press the CH ▲▼ buttons to be sure the VCR/AUX mode is
present. (Should appear between the highest and lowest broadcast channels
within your TV’s scan memory.)

Note: There are two methods to delete channels from the 8-channel SURF control ring:

•

To remove all channels from the SURF memory (with the exception of channel 3
which will be left within the SURF list) - Select the CABLE control in the on-screen
menu and press the (+), (-) buttons. Adjust the control “YES/NO/YES” if you have
Cable TV; or “NO/YES/NO” if you are in the broadcast Antenna mode.

•

To remove all channels from the SURF memory (with the exception of the last
viewed and currently selected channels) - From the SURF on-screen control option
press the (+) or (–) button to select the ALT.CHN. control in the on-screen menu. Press
the (+) or (–) button again to reselect the SURF option.

4 - IB7756 E001