Philips SPC620NC-27 - Manual (Page 11)

Chapter EN
11
The Philips SPC620NC video properties can be changed:
- from within an application;
- by clicking the VProperty icon ‘‘
‘ in the Windows taskbar,
bottom right of your screen;
- by selecting ‘PC Camera Settings’ under ‘Preferences’ in the
VLounge selection screen;
- by clicking the ‘ ’ icon in the VLounge selection screen.
General settings
1 Flickerless image
The Flickerless image option should only be used under
flickering light conditions (e.g. fluorescent or neon lamps) to
prevent flickering or strangely colored video images.
If this option is used under normal lighting conditions the
video image may be overexposed.
2 Region
If you are using the Philips SPC620NC in Europe, select
'50 Hz' and if you are using the Philips SPC620NC in
North America, select '60 Hz'. For Asia this setting is
dependent on the local mains output. E.g. for China, select
‘50 Hz’ and for Taiwan, select ‘60 Hz’. For Japan the setting is
region dependent. Please check your local mains output to
find the correct ‘Region’ setting.
1
2
WebCam settings