Philips LFH0652-27B - Manual (Page 15)

Customize settings 15 
Table of contents
8 Customize settings
You can customize the settings of your Voice Tracer to suit the
recording conditions and your personal preferences.
1 Press the MENU button while the recorder is stopped.
• The display shows MODE and the current setting for recording mode
is flashing.
2 Press the + or – button to navigate the setting icons bar up or
down.
3 Press the h or b button to change the displayed setting. The
new setting is automatically accepted (exceptions: the FORMAT
and SPLIT functions must be confirmed by pressing the
f
button).
4 Customize settings as required or exit the menu by pressing the
MENU button.
Icon/
Display
Option Description
SLP
LP
SP
HQ
SHQ
PCM Choose among several recording modes
including uncompressed PCM format, SHQ,
HQ, SP, LP or SLP for a longer recording time.
Refer to chapter 11, Technical data on page 19
for details.
MIC
HI
LO Adjust the recording sensitivity to avoid
recording background noises and to adjust to
the recording environment.
VA
On
Off Voice-activated recording is a convenience fea-
ture for hands-free recording. When voice-
activated recording is enabled, recording will
start when you begin speaking. When you
stop speaking, the recorder will automatically
pause recording after three seconds of silence,
and resume only when you begin speaking
again.
CLVOICE
On
Off Dynamic emphasis on quiet passages to
improve the intelligibility of quiet voices.
BEEP
Yes
No The recorder gives sound feedback about but-
ton operations or errors.
Icon/
Display
Option Description