beautypg.com

6 troubleshooting – Philips SRU5108-27 User Manual

Page 12

background image

12

EN

Do not move or change the distance between the two remote

controls until you have learned all the required buttons for

the selected mode.

When learning, do not release the button being learned until

the red light indicator has flashed off for half a second.

Avoid learning your original remote control Volume / Mute

buttons unless you are sure these operate the same device

e.g. some original DVD remote controls include TV Volume /

Mute button control and can have two different types of code.

Avoid learning your original remote control DVR control

buttons unless you are sure these operate the same device

e.g. some original TV remote controls include DVR button

control and can have two different types of code.

If you have continual problems learning from your original

remote control, try clearing all learned commands as

described in chapter 5.2.1 ‘Clearing all learned commands

under a mode’.

6 Troubleshooting

Note

This remote control operates the common features of most

but not all models and brands of IR (Infrared) controlled

Audio / Video equipment. This remote control may provide

functions that are not available on your equipment.

The remote control does not operate your product.

Try the following hints to remedy the problem:

Make sure you selected the correct device mode.

• Set up the remote control with a new code.

Install new batteries.

• Check if you selected the correct device mode.

The remote control does not operate some features of

your product

Use the L1 and L2 buttons to learn the remote control

commands that are not available.

The red light indicator flashes after you program a

product code

• The remote control did not accept the code.

• Try to program the code again or try a different code.

When you have additional questions about setup, usage, advanced

features, spare parts, warranty, etc. of the SRT5108/27, see

www.philips.com/support.

For further help with setup, please call: 919-573-7854.

129238_SRU5108_Short.indd 12

129238_SRU5108_Short.indd 12

05-12-2008 15:31:37

05-12-2008 15:31:37