Philips SDV2225T-27 - Manual (Page 6)

6
Note
Ensure you position your antenna on a flat surface. •
4 Set up SDV2225T
For VHF reception
1
Extend the VHF dipoles to the longest
possible length.
3 Get started
To ensure the antenna to work properly, read
the user manual of your television before you
start. Set the television so that it receives the
signal from an ANTENNA instead of CABLE or
SATELLITE.
Installation
Determine the signal strength
Before Installation, determine the best
location for optimum reception. It is important
for the antenna to have an unobstructed path
to the transmitter. For best results, ensure the
antenna faces the location of the transmitter.
Note
Choose a location near a window which gives the
•
antenna a clear view of the transmitter.
Note
Place the antenna away from the metal surface to
•
avoid interference.
Connect to the TV
1
One end of the coaxial cable is already
connected to the signal output of the
antenna.
2
Connect the other end to the input on
the TV receiver.
EN