Philips DVD615AT - Manual (Page 2)

3,4
1
To simply play a Disc, follow these steps. Additional playback
features are described in the accompanying owner’s manual.
1 Press POWER ON/OFF on the front of the DVD Player
to turn on the Player. (You can turn on the DVD Player by
pressing POWER
2 on the remote control only if the POWER
ON/OFF button on the front of the Player is depressed.)
2 Turn on your TV. Set it to the correct Video In channel.
You should see the blue Philips DVD background screen or the
player's screen saver on the TV (if no Disc is in the Player).
3 Press OPEN/CLOSE
/ on the front of the DVD Player to
open the disc tray.
4 Load your Disc in the tray, with the label facing up and the
shiny side facing down. If the Disc (DVD) is two-sided, make sure
the side you want to play is facing up. Press OPEN/CLOSE
/
again to close the tray.
5 Playback may start automatically. If not, press PLAY
2. If
a Disc menu appears, use the
341 2 and OK buttons or the
Number buttons to select features or start playback from a
menu. Follow the instructions in the Disc menu.
6 To stop playing the Disc, press STOP C .
Region Codes
DVDs must be labeled for ALL regions or for Region 1 in order to play on this DVD Player. You cannot play Discs
that are labeled for other regions. If one of these logos appears on your DVD or its case, it should play on this DVD Player.
Color Systems
Recordings are made according to a color system.The most common color system in the United States is NTSC.
This DVD Player is compatible with NTSC and PAL. Make sure the Discs you play were recorded in NTSC or PAL and
your TV is NTSC or PAL compatible. Look for the color system of the DVD on the DVD or on the Disc case.
Playable Discs
This DVD Player will play the following types of Discs:
DVD
(Digital Video Disc)
Audio CD
(Compact Disc
Digital Audio)
Video CD
Super Video CD
CD-R (CD-Recordable)
CD-RW (CD-Rewritable)
Recordable
ReWritable
5
6
NTSC PAL
Quick Use Guide (cont’d) Quick Use Guide (cont’d)
DVD615 /EL6533E001