beautypg.com

Sing the, Ideo, Nput – Philips 24RF50S99 User Manual

Page 25: Acks

background image

25

VOL

75

VIDEO

L/

Mono

AUDIO

R

Monitor out

COMPONENT VIDEO INPUT

AV1 in

S-VIDEO

Y

Pb

Pr

75

VIDEO

L/

Mono

AUDIO

R

Monitor out

COMPONENT VIDEO INPUT

AV1 in

S-VIDEO

Y

Pb

Pr

ANTENNA

OUT

ANTENNA

IN

VIDEO

AUDIO

IN

IN

OUT

OUT

L

R

3

1

2

4

5

6

S-VHS

AV2 in

AV2 in

U

SING THE

S-V

IDEO

I

NPUT

J

ACKS

T

he S(uper)-Video connection on the
rear of the TV can provide you with

better picture detail and clarity for the
playback of accessory sources such as
DBS (digital broadcast satellite), DVD
(digital video discs), video games, and
S-VHS VCR (video cassette recorder)
tapes than the normal antenna picture
connections.

NOTE: The accessory device must
have an S-VIDEO OUT(put) jack in
order for you to complete the connec-
tion on this page.

Connect one end of the S-VIDEO

CABLE to the S-VIDEO jack on the

back of the TV. Then connect one end
the AUDIO (red and white) CABLES
to the AV2 in AUDIO L and R(left and
right) jacks on the rear of the TV.

Connect other end of the S-

VIDEO CABLE to the S-VHS (S-

Video) OUT jack on the back of the
VCR. Then connect the other ends of
the AUDIO (red and white) CABLES
to the AUDIO (left and right) OUT
jacks on the rear of the VCR.

Turn the VCR and the TV ON.

Press the CH + or – buttons on the

remote to scroll the channels until

SVHS appears in the upper left corner
of the TV screen.

Slide the TV/VCR/ACC switch to

the VCR position.

Now your ready to place a prere-

corded video tape in the VCR and

press the PLAY

button.

Let's

Look

Inside!

AUDIO IN

(RED/WHITE)

VCR

EQUIPPED WITH

S-VHS (S-Video) JACKS

S-VIDEO

CABLE

BACK OF VCR

BACK OF TV

IF YOU ARE USING A

MONO DEVICE, USE

ONLY THE AUDIO

L/MONO JACK.

The S-VIDEO and VIDEO

AV2 in(puts) are in parallel. The

S-VIDEO input is dominant when in
use. If separate video signals are con-
nected to the S-VIDEO and VIDEO
AV2 in(put), the signal from the VIDEO
AV2 in(put) will not be usable.

S

MART

H

ELP

Note: SVHS will appear as a valid
channel option only if a SVHS device
is connected to the S-Video Input Jack.
If the device is connected to the AV2
Video In, the channel will appear as
AV2.

SVHS