Philips Bluetooth speaker with clock radio SB170 Bluetooth® and NFC USB port for charging Dual alarm FM - Manual (Page 10)

8 EN
7 Play from an
external device
Through an audio input cable, you can play
audio that is transferred from an external audio
device, for example, an MP3 player.
1
Connect an audio input cable with a 3.5-
mm connector on both ends between
• the AUDIO IN socket on this product,
and
• the headphone socket of an external
device.
2
Press SOURCE/SET to switch the product
to the AUDIO IN mode.
3
Play audio on the external device (refer to
its user manual).
8 Other features
Set an alarm timer
Note
•
Make sure that you have set the clock correctly.
1
Press and hold AL1/AL2 for 2 seconds to
activate alarm setting.
» The hour digits blink.
2
Press - TUNE/TIME or TUNE/TIME+
repeatedly to set the hour, and then press
SOURCE/SET to confirm.
» The minute digits blink.
3
Press - TUNE/TIME or TUNE/TIME+
repeatedly to set the minute, and then
press SOURCE/SET to confirm.
4
Press - TUNE/TIME or TUNE/TIME+ to
select an alarm source, and then press
SOURCE/SET to confirm.
• TUNE: the last listened FM radio
station
• BUZ: the buzzer
5
Press - TUNE/TIME or TUNE/TIME+
to set the alarm volume, and then press
SOURCE/SET to confirm.
» The alarm time and icon are displayed.