beautypg.com

Getting started – Philips DVP3500-37 User Manual

Page 18

background image

DVP3005/37_3

English

18

Selecting the colour system that
corresponds to your TV

This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system of
the Disc, the TV and the DVD Player
should match.

General

Audio

Video

Preference

TY Type

PAL

TV Display

Multi

Progressive

NTSC

Sharpness

Brightness

Contrast

Closed Caption

Black Level

- - Video Setup Page - -

1

Press SYSTEM MENU.

2

Press 2 repeatedly to select {VIDEO
SETUP PAGE}.

3

Press

3 4 to highlight {TV TYPE}, then

press

2.

Getting Started

TIPS:

To return to the previous menu, press

1.

To remove the menu, press

SYSTEM MENU

.

4

Press

3 4 to highlight one of the options

below:

PAL

– Select this if the connected TV is

PAL system. It will change the video signal
of a NTSC disc and output in PAL format.

NTSC

– Select this if the connected TV

is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.

Multi

– Select this if the connected TV is

compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.

5

Select an item and press OK.

Helpful Hints:

Before changing the current TV

Standard setting, ensure that your TV
supports the ‘selected TV Type’ system.

If there is no proper picture on

your TV, wait for 15 seconds for auto
recovery.

1. ENSURE THAT YOUR TV SUPPORTS
NTSC STANDARD.
2. IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV, WAIT 15 SECONDS
FOR AUTO RECOVER.

CANCEL

OK

CONFIRM AGAIN TO USE NEW TV TYPE SETTING.

CANCEL

OK

To deactivate Progressive manually

When the distorted picture still
appears on the TV,

it may be due to

the connected TV does not accept
progressive signals, and progressive is set
by mistake. You must reset the unit to
interlace format.

1

Turn off

your TV progressive scan mode

or turn on to interlaced mode (refer to
your TV user manual.)

2

Press OPEN/CLOSE on the DVD player
to open the disc tray.

3

Press numeric keypad ‘1’ on the
remote control for few seconds.

The DVD blue background screen

will appear on the TV.

01-37 DVP3500_US3

14/07/05, 9:55 AM

18

This manual is related to the following products: