Philips DC291-17 - Manual (Page 17)

17
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
Press SLEEP repeatedly to select a set
period of time (in minutes).
When the sleep timer is activated, the
»
display shows , and the volume will
gradually decrease in the last 5 minutes.
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] (off )
is displayed.
When the sleep timer is deactivated,
»
disappears on the display.
Adjust display brightness
1
Press BRIGHTNESS/REP ALM repeatedly
to select different levels of display
brightness.
Activate and deactivate the alarm
timer
1
Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
If the timer is activated, [
»
AL 1] or
[ AL2] is displayed.
If the timer is deactivated, [
»
AL1] or
[ AL2] disappears.
Repeat alarm
1
When the alarm rings, press
BRIGHTNESS/REP ALM.
The alarm repeats ringing minutes later.
»
Tip
You can press • / to adjust the interval to
repeat alarm.
Stop alarm ring
1
When the alarm rings, press the
corresponding ALM 1 or ALM 2.
The alarm stops but the alarm settings
»
remain.
View the alarm settings
1
Press ALM 1 or ALM 2.
English
EN