Black Box #22017 - Manual (Page 2)

2 of 3 6/4/2007
#22017 724-746-5500 blackbox.com
FEATURES
• Preassembled—we do the work for you!
• Easily adapt to three different EIA rack
mounting standards: 19", 23", and 24".
• Pre-drilled bottom can accommodate
heavy-duty server shelf.
• Choose movable AC power strip with
6, 8, or 16 outlets.
• Order the optional exhaust fan panel to
get air circulation inside the cabinet.
• Available in blue, black, ivory, or gray.
OVERVIEW
Designed with all the features you want, the Elite Series
Data Cabinet from Black Box requires no assembly.
Removable side panels install flush—with no handles or
knobs to break. Vents on the top front and rear door aid air
circulation and help reduce excess heat and humidity.
The cabinet fits into most space-saving arrangements,
whether you want the cabinet’s door to swing left or right.
The spring-loaded hinges can be easily reversed for right or
left hanging.
The cabinet accommodates a wide range of equipment
sizes. Adjustable front-to-rear rails can be moved to EIA 19",
23", or 24" rackmounting and are marked every 3U for ease
of installation.
10-32 rails are standard; however, an M6 version of the
cabinet is also available and separate M6 Mounting Rails are
available for 78" and 84" cabinets. The rails, supported top
to bottom, don’t require side brackets. Because the sides and
corners of the cabinet are open, cable management is easier.
Cable management is easy. A cover plate below the rear
door can be removed to reveal a convenient opening for
cable entry (or additional air flow). Grommeted bottom edges
help prevent accidental damage to your cables.
All cabinet models include a movable AC power strip,
which can be mounted in any of the four corners and moved
up and down to suit your needs. Choose a cabinet with 6, 8,
or 16 outlets. If you need additional outlets, you can add extra
power strips at any of the cabinet’s corners.
You can also replace the standard louvered top panel
with an optional solid top, or you can order an optional top
panel containing three or six powerful exhaust fans. With the
help of six fans, you can direct air out the top of your cabinet
at a rate of 450 cubic feet per minute. That’s at least twice the
rate of most other cabinets. The fans refresh the cabinet’s
interior about every four seconds, giving you unparalleled
protection against heat buildup near your equipment.
Shelves.
Use the Fixed, Vented Server Shelf in a four-point pattern
anywhere in your cabinet. Available in three depths and for
either 19" or 23" rails, the shelf can hold up to 150 or 200
pounds of weight, depending on the model you order. This
shelf features mounting ears and adjustable side rails that
ensure a perfect cabinet fit.
The Heavy-Duty Solid Shelf, which has a weight capacity of
300 pounds, can be used to mount servers or other equipment
anywhere in your cabinet.
In addition to mounting ears and lips on its sides, this 3U-
high shelf has 2" flanges on its front and back and 1" flanges
on its sides. You can mount the shelf with its flanges facing up
or down.
For the bottom of your Elite Series Data Cabinet, you can
order our Sliding Server Shelf, which can hold servers that
weigh up to 120 pounds.
If you’re looking for more organization from your cabinet,
then order the Sliding Server Shelf with Fins. Use it to
separate smaller components into two or three compart-
ments. The shelf comes with four adjustable fins and a cable
management bar.
You can use a single center fin to create two 8.54" wide
compartments in the shelf. Or you can use two center fins to
create three compartments. The fins, along with the cable
management bar, can be removed if you want to use the shelf
to store even larger items.
The sliding shelf, which can be used anywhere in your Elite
Cabinet, mounts to all four upright rails. It supports up to
110 pounds of weight.
We also offer a Rackmount, Vented, 4-Point Shelf that’s
ideal for harsh environments where ventilation is required.
Available in both fixed and sliding models for 19" and 23"
rails, the 24" deep shelf supports up to 50 pounds of
equipment. The included brackets adjust from 20" to 29".
Vertical Cable Managers.
For maximum organization of cables leading to equipment
stored in your Elite Cabinet, order a Vertical Cable Manager.
Available in three heights, this rugged, steel unit features
a 2.35" wide by 3.5" deep swing-out cover for your cable
bundles as well as clip-on cable retainer rings and receptacles.
Designed to be attached to the outside of the Elite
Cabinet’s vertical mounting rail, the Vertical Cable Manager
can be used on the cabinet’s left or right side to route cables
neatly along the rail.
TECH SPECS
Frame — 16-gauge steel
Size —
525056–525059: 30"H x 29"W x 30"D (76.2 x 73.7 x 76.2 cm);
525060–525063: 48"H x 29"W x 30"D (121.9 x 73.7 x 76.2 cm);
525066–525069: 60"H x 29"W x 30"D (152.4 x 73.7 x 76.2 cm);
525070–525073: 72"H x 29"W x 30"D (182.9 x 73.7 x 76.2 cm);
525074–525077: 78"H x 29"W x 30"D (198.1 x 73.7 x 76.2 cm);
525078–525081: 84"H x 29"W x 30"D (213.4 x 73.7 x 76.2 cm);
536000–536003: 84"H x 29"W x 36"D (213.4 x 73.7 x 91.4 cm)
Weight —
525056–525059: 100 lb. (45.4 kg);
525060–525063: 125 lb. (56.7 kg);
525066–525069: 150 lb. (68 kg);
525070–525073: 200 lb. (90.7 kg);
525074–525077: 250 lb. (113.4 kg);
525078–525081: 350 lb. (158.8 kg);
536000–536003: 373 lb. (169.2 kg)