Hyundai H-VC1081 - Manual (Page 3)

3
Vacuum cleaner assembling
Always remove the plug from the power supply before fitting or removing accessories.
Fitting flexible hose
Insert the flexible hose into the air inlet and push down until it clicks.
Hose removing
To remove the flexible hose from the vacuum cleaner, press the release button situated on the flexible hose base then pull to remove it from the air inlet.
Fitting metal tube and accessories
Assemble the plastic tube from 2 pieces.
Insert a flexible hose into the plastic tube.
Fit a nozzle to the plastic tube:
- Universal floor brush is intended for cleaning bare floor and floor coverings.
- Furniture brush is for cleaning curtain or dust on the decorating surfaces
- Furniture/ Crevice nozzle is for cleaning sofa, curtain or dust on the decorating surfaces, corners and between cushions.
Instruction for use
Before using the appliance, unwind a sufficient length of the cord and insert the plug into the power supply. The yellow mark on the cord shows the ideal
cord length. Do not unwind the cord beyond the red mark.
Press the On/Off button to switch the unit on. To stop it press the On/Off button again.
You can adjust the air flow using the air flow regulator on the flexible hose.
You can adjust the vacuum cleaner power using the power control knob on body:
- decrease the power for cleaning curtains, books, furniture, etc.
- increase the power for cleaning bare floor
Turn the power control knob clockwise to increase the power, anticlockwise - to decrease it.
To rewind the cord, press the rewind button and guide the cord with hand to ensure that it does not whip causing damage.
Advantages of your vacuum cleaner
Your vacuum cleaner is equipped with 5 step filtration system:
- the constant cloth dust bag;
- the motor protection filter established between the dust bag compartment and the engine of a vacuum cleaner;
- the air filter established on the air outlet.