Pip c, Asic, Onnection – Philips 32PS61S User Manual
Page 40
40
ANTENNA
OUT
ANTENNA
IN
VIDEO
AUDIO
IN
IN
OUT
OUT
L
R
75
⍀
VIDEO
L/
Mono
AUDIO
R
Monitor out
COMPONENT VIDEO INPUT
AV1 in
S-VIDEO
Y
Pb
Pr
OR
1
AV2 in
P
icture in Picture (PIP) is the
showing of two pictures on the
screen at the same time (one main
screen picture and a smaller inset
picture, or PIP).
Note: The PIP picture must be sup-
plied by a VCR (or other accessory
device equipped with a VIDEO
OUTPUT jack).
The following is a basic PIP
hookup using a VCR to supply the
secondary picture.
Connect the VIDEO OUT
jack on the VCR to the VIDEO IN
(yellow) jack on the rear of the TV.
Also connect the AUDIO OUT
(Right and Left) jacks from the
VCR to the AUDIO IN jacks (red
and white) on the TV.
Also be sure that there is a normal
Cable or Antenna signal connection
between the VCR and the TV.
This completes the basic PIP
hookup. Refer to page 44 for
“More PIP Connections.”
Move to the next page after
the VCR to TV PIP connections
have been completed.
B
ASIC
PIP C
ONNECTION
S
MART
H
ELP
Remember, for other pos-
sible connections see page 44
for the “More PIP Connections”
section.
If you have a single (Monaural)
Audio Output VCR, there are two
methods of connection. Use only
the Left Audio IN and leave the
Right Audio IN with NO connec-
tion. Or, “Y” connectors are avail-
able to complete your connection.
Contact your dealer, or our Parts
Information Center,
1-800-851-8885, for details.
MAIN SCREEN PICTURE PIP INSET PICTURE
BACK OF TV
AUDIO OUT
FROM VCR
TO AUDIO IN
ON TV
(RED AND WHITE)
VIDEO OUT
(YELLOW)
ANT OUT
OUTDOOR
UHF/VHF
ANTENNA
CABLE TV
SIGNAL
VCR
(OR SIMILAR DEVICE)