Philips SE4552B-17 - Manual (Page 69)

67 Frequently asked questions
Phonebook entry cannot be stored
and Memory Full is displayed!
• Delete an entry to free memory
before saving your contact again.
The PIN code is wrong!
• The default PIN is 0000.
• Reset the handset to revert to the
default PIN code if it has been
changed before (see “Reset Unit” -
Section 10.8).
The answering machine does not
record calls.
• Make sure the answering machine is
connected to the power adaptor, and
the power adaptor is plugged into
mains supply which is switched on.
• Check if the answer machine is off, or
Answer only mode is selected.
• Check to see if the answering machine
is memory full. If so, delete some or
all messages.
• Try switching off the power at the
mains socket, and then turn it on again
after 1 minute.
Unable to perform remote
operation
• Make sure the remote access is on
(see Section 12.6.2).
• Make sure you entered the correct
remote access code.
• Use a touch-tone phone.
If the above solutions do not help,
remove the power from both the
handset and the base. Wait for 1 minute
and try again.
Note