Philips VRA471AT99 - Manual (Page 25)

VAR.SLOW
VCR TV CBL/DBS
VOL.
CH.
MUTE ALT.CH
3
6
9
0
2
5
8
1
4
7
TRACKING F.ADV
VCR/TV
REC/OTR
POWER
SPEED
STATUS/EXIT
STOP
PLAY
F.FWD REW
MEMORY
X2 PLAY
SLOW
VCR PLUS+
/ENTER
QUICK TIME INDEX
SEARCH
REC END SKIP
EJECT
MENU CLEAR
PAUSE/STILL
Remote Control Buttons (cont’d) 25
REW(ind)/{ Button
When tape playback is stopped, press to rewind the tape at high speed.
During playback, press to rewind the tape while the picture stays on the
screen. Details are on page 46. Press to return to a previous on-screen
menu. Or, if you have a Magnavox, Philips, or Philips Magnavox TV, use the
REW(ind)/
{ button to adjust the controls in the TV menu.
MENU Button
Press to access the VCR menu. Or, if you have a Magnavox, Philips, or
Philips Magnavox TV, press the TV button, then press the MENU button
to display the TV menu.
TRACKING o /p Button
During normal or slow motion playback, press to adjust the tracking. Details
are on page 45.
MUTE Button
Press to eliminate the TV’s sound. Press again to restore the volume.
REC(ord)/OTR Button
Press once to start a recording. Details are on page 31. Or, press repeated-
ly to start a One-Touch Recording. Details are on page 32.
Number Buttons
Press to select channels at the VCR, TV, Cable Box, or Direct Broadcast
System; use to set up VCR features (such as the clock). (You can not
select channels above 99 at the Magnavox, Philips, or Philips Magnavox
TV.)
● Cable Users
Enter channel numbers as a two-digit number for the quickest results. For
example, to select channel 6, press 0,6. If you only press the Number 6
button, channel 6 will be selected after a brief delay. (There also may be a
brief delay when you select channels 10, 11, and 12.) If you want to select
channels 100 and above, enter channel numbers as a three-digit number.
For example, to select channel 117, press 1, 1, 7.
● Antenna Users
Enter channel numbers as a two-digit number for the quickest results. For
example, to select channel 5, press 0,5. If you only press the Number 5
button, channel 5 will be selected after a brief delay. You may only select
channels 2-69.
VAR(iable). SLOW Button
During slow motion playback, press to vary the tape playback speed from
1/6 to 1/30 of normal speed. Details are on page 47.
• Press the VCR button before pressing other VCR buttons; press the TV button before pressing other TV buttons;
press the CBL/DBS button before pressing other Cable Box/Direct Broadcast System buttons.
• The buttons with a shaded description may also operate features of your TV, Cable Box, or Direct Broadcast
System.
• Buttons that are shaded in the illustration light up for five seconds when you press any button on the remote
control.
Helpful Hints
ALT. CH (Alternate Channel) Button
Press while in TV mode to return to the TV channel you were viewing
immediately before switching to your current channel. This button does
not have an effect on channels changed at the VCR.