Philips 27PT6442-37B - Manual (Page 24)

S ETTING TV TO S TARTUP ON A S PECIFIC C HANNEL
20
Y ou can select a specific channel
that the television will tune to
when the timer turns the set On.
Follow these steps to select the
channel.
1 Press the MENU button on
the remote to show the on-
screen menu.
2 Press the CURSOR UP 3 or
DOWN 4 buttons to scroll
through the on-screen menu
until the word Features is
highlighted.
3 Press the CURSOR RIGHT
2 button to display the
Features menu.
4 With Timer selected, press the
CURSOR RIGHT 2 button
to display the Timer menu.
5 Press the CURSOR UP 3 or
DOWN 4 buttons to scroll
through the Timer menu until
Channel is highlighted.
6 Press the Numbered buttons
to enter the desired start-up
channel. Or, press the CUR-
SOR RIGHT 2 or CURSOR
LEFT 1 or the CH+ or CH-
buttons repeatedly to enter the
start-up channel you want.
NOTE: The Activate Control must
be set to Once or Daily for this
Channel control to take effect.
7 When finished, press the
STATUS /EXIT button to
remove the on-screen menu
from the TV’s screen.
VOL
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
More...
Main
Picture
Sound
Features
Install
Timer
AutoLock
Active Control
Digi. Pic. Demo
Timer
Time
Start Time
Stop Time
Channel 2
Activate
Display
7
3
4
6
1
Timer
Time
Start Time
Stop Time
Channel
Activate
Display
10:-- AM
6
6
2
5
2
5
6
Remember, be sure to press “0” and
then the hour number for single digit
entries.
You can get to the Clock setting by
pressing the Clock button on the
remote control.
The TV’s clock settings may be lost
when the TV is unplugged or when
AC power to the set is interrupted.
H
ELPFUL
H
INTS
NOTE: Active Control will only
appear in the menu of models
27PT6441/37 and 27PT6442/37.