Philips Norelco SensoTouch wet and dry electric razor 1190XD DualPrecision heads Jet Clean 50 min with Precision trimmer and Jet Clean system - Manual (Page 17)

ENGLISH
C
5 Remove the cutter from the comb.
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong comb, it
may take several weeks before optimal shaving
performance is restored.
C
6 Clean the cutter with the cleaning brush
supplied.
C
7 Clean the inside of the comb.
C
8 After cleaning, place the cutter back into
the comb with the cutter legs pointing
downwards.
9 Repeat the process for the other two
cutters and combs.
C
10 Place the retaining frame back onto the
shaving head holder.
33
ENGLISH
◗ You may store your razor in the Jet Clean
System.
Extra-thorough cleaning method
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1 Turn razor OFF.
C
2 Pull the shaving head holder off the
bottom part of the shaving unit.
C
3 Slide the green retaining frame in the
direction of the arrows indicated on the
retaining frame.
C
4 Lift the retaining frame out of the shaving
head holder.
32