beautypg.com

Getting started, Finding the correct viewing channel, Setting language preferences – Philips DVP3980-37 User Manual

Page 18

background image

E

ng
li

sh

18

Finding the correct viewing
channel

A

Press STANDBY-ON to turn on this

unit.

B

Turn on the TV and switch it to the

correct video-in channel. You should see
the blue DVD background screen.

You may go to the lowest channel on

your TV, then press the Channel Down
button on your TVs remote control until
you see the Video In channel.

You may press

° button repeatedly

on your TVs remote control.

Usually this channel is between the

lowest and highest channels and may be
called FRONT, A/V IN, VIDEO, etc..

If you are using a RF modulator, set

the TV to channel 3 or 4.

Refer to your TVs user manual on

how to select the correct input on your
TV.

C

If you are using external device, (such as

audio system or receiver), turn it on and
select the appropriate input source for
this unit output. Refer to the device user
manual for detail.

Getting Started

Setting language preferences

The language options are different
depending on your country or region. It
may not correspond to the illustrations
shown on the user manual.

On-screen display (OSD) language

Select this to change the language of the
On screen display menu of this unit.
The menu language will remain once you
have set it.

A

Press SETUP on the remote control.

{ General Setup Page } appears.

B

Use

keys to select { OSD

Language } in the menu and press .

Disc Lock

OSD Language Auto (ENG)

Sleep

ENGLISH

Lip Sync

FRANÇAIS

Volume ESPAÑOL

Auto Standby

General Setup Page

C

Use

keys to select a language and

press OK to confi rm.

Note:
– To synchronize with a Philips
‘EasyLink’ TV, the OSD language must be
set to { Auto (xxx) }. This is the language
available from the Philips ‘EasyLink’ TV.
– If a non-supported language is selected,
the default OSD language of this unit will
be used.

This manual is related to the following products: