Philips SDV5222T-27 - Manual (Page 4)

4
Warning
To reduce the risk of fire or electric shock, this •
apparatus should not be exposed to rain or moisture
and objects filled with liquids, such as vases, should
not be placed on this apparatus.
Caution
To prevent electric shock, fully insert the plug. (For •
regions with polarized plugs: To prevent electric
shock, match wide blade to wide slot.)
Notice for USA
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
Relocate the receiving antenna. •
Increase the separation between •
equipment and receiver.
Connect the equipment into an outlet on
•
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
•
radio/TV technician for help.
1 Important
Safety
This manual contains important information
about the Philips indoor television antenna.
Read it carefully before you start the installation
and setup.
The product shall not be exposed to •
dripping or splashing and that no objects
filled with liquids, such as vases, shall be
placed on the product.
To completely disconnect the power
•
input, the mains plug of the product shall
be disconnected from the mains.
Where the mains plug is used as the
•
disconnect device, the disconnect device
shall remain readily operable.
No naked flame sources, such as lighted
•
candles, should be placed on the product.
Know these safety symbols
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an
electrical shock.
The ‘exclamation mark’ calls attention to
features for which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
EN