Philips DCM230-37B - Manual (Page 19)

English
19
CD/MP3-CD Operation
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The REPEAT
modes can also be combined with PROGRAM.
1
To select your play mode, press PLAY•MODE
(SHUFFLE or REPEAT on the remote
control) before or during playback until the
display shows the desired function.
➜ appears if the shuffle playback is activated
and disappears if deactivated.
➜
If appears, it indicates to play the current
track repeatedly.
➜
If ALL is displayed, it indicates to play all
tracks in the whole disc repeatedly.
➜
For an MP3 CD/WMA, if both and
ALB
flash on the display panel, it indicates to play the
current album repeatedly.
2
Press ÉÅ to start playback if in the STOP
position.
➜ If you have selected SHUFFLE, playback starts
automatically.
3
To return to normal playback, press the
PLAY•MODE (SHUFFLE or REPEAT on
the remote control) until
or
is no
longer displayed.
●
You can also press
9 to stop playback and
cancel your play mode.
Note:
– The Repeat and Shuffle functions cannot be
activated simultaneously.
Programming track numbers
Program in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
40 tracks can be stored in the memory.
1
Press PROG to enter the programming mode.
➜
A track number flashes.
2
Press S / T (or
¡ / ™ on the remote
control) to select your desired track number.
●
For an MP3 CD/WMA, press ALBUM/
PRESET +/- (or
¡ / ™ on the remote control)
to select a desired album number.
3
Press PROG to confirm the track number to be
stored.
➜ PR X displays, in which X denotes the next
program number to be stored.
4
Repeat steps 2-3 to select and store all desired
tracks.
➜ PROGRAM FULL appears if you attempt to
program more than 40 tracks.
5
Press
9 to finish programming.
➜ PROG displays on the screen.
6
To start playback of your disc program, press
ÉÅ directly.
Erasing the program
You can erase the program by:
● pressing 9 once in the STOP mode;
● pressing 9 twice during playback;
➜ PROG disappears.
●
ejecting the current disc;
pg001-028_DCM230_37-Eng 2010.3.31, 15:02 19