Philips JR24CDRW - Manual (Page 24)

What if my computer crashes while using the drive?
Restart the computer and Windows application, then start the installation
or copying process again.
What is the purpose of the LED’s on the left side on my unit?
The LEDs will only light up if both the power supply and the computer
are connected.
LED color Description
Green . . . . . . . . No disc present
Blue . . . . . . . . . Disc present / reading disc
Red . . . . . . . . . . Recording in progress
What is the purpose of the BLUE BUTTON?
Push this button to open an application window for this drive with useful
Internet addresses and applications. (Provided the connected computer is
switched on, has a functioning Internet connection and has the Blue Button
application resident in its memory.)
What if my door will not open and I have a disc stuck in the drive?
Disconnect the power supply from the drive first and be sure the disc does
not spin anymore (see lid window). Then insert a short and slender pin
behind the stud within the hole in the bottom of the drive and pull the stud
forward to release the lid.
NOTE: The eject hole is for emergency use only with the drive discon-
nected from the power supply. For normal opening of the lid connect the
power supply to the Jack Rabbit and push the OPEN button.
Immediate interruption of the recording process (red led illuminated).
By keeping the OPEN button pressed for more than 4 seconds, the record-
ing will be interrupted immediately. The lid will open and the recording
software will report an error in the recording process.
NOTE: This will render the disc useless.
IF YOU NEED ASSISTANCE...
Visit our web site at www.pcstuff.philips.com or www.philips.com
Or, call us at 1-888-541-5837. We are available, Eastern Standard Time, from 9
a.m.-11 p.m. EST Monday-Friday, and 11 a.m.-10 p.m. EST Saturday and
Sunday.
Install Guide panels 10/3/02 8:21 AM Page 24