Operate the headset, Led and sound indication welcome to philips – Philips SHB6000-28 User Manual
Page 2

© 2011 Koninklijke Philips Electronics N.V. All rights reserved.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
V1.0
Turn headset on/off
Hold until LED turns on/off.
Play / Pause music
Tap
Stop music
Hold
Next / Previous track
Tap /
Adjust volume
Press VOL +/VOL -
Pick up / End a call
Tap
Reject a call
Hold
Redial the last number
Press twice quickly.
Activate voice dialing*
Hold until beep occurs.
Mute/Unmute the Mic
Double tap during a call.
Transfer a call to a mobile phone
Hold during a call.
Operate the headset
*Available if supported by your mobile phone.
The red/blue LED flashes alternately.
The headset is ready for pairing.
The blue LED flashes once every 6
seconds.
The headset is connected to the device.
The blue LED flashes twice every 3
seconds.
The headset is not connected.
The blue LED flashes once every half a
second.
There is an incoming/outgoing call.
The blue LED flashes once every second. The headset is active on a call.
The red LED flashes three times and
beeps twice every minute.
The battery is low in power.
Solid red LED.
The headset is charging.
The LED is off.
The headset is off./Charging is finished.
The headset beeps every 5 seconds.
The Mic is muted.
LED and sound indication
Welcome to Philips!
For an optimal experience, register your product at
www.philips.com/welcome