Philips 20PT9007D-17 - Manual (Page 11)

HOW TO USE THE SOURCE TYPE CONTROL
Follow these steps for Digital Mode and Analog Mode.
Press MENU button on the remote control to
display onscreen menu.
Press CURSOR or to scroll through the
onscreen menu until you see Setup highlighted.
Press CURSOR or to display the SETUP menu
features.
MAIN MENU
Exit
Picture
Setup
Parental Control
Time
Press CURSOR or to scroll through the
setup features until you see Auto Channel S
earch
highlighted.
Press CURSOR or to display the Auto Chan
nel
Search menu features. Use CURSOR or to
highlight Source Type.
Auto Channel Search
Go back
Source Type Cable
Start Search
Press CURSOR or to toggle between Antenna and
Cable.
he SOURCE TYPE control lets you change the TV input signa
l to ANTENNA or CABLE mode. It is important
that you know which type of signal to look for (Cable or Antenna).
T
When finished, press CLEAR button to clear the menu
from the TV screen.
H
ELPFUL
H
INTS
When Cable is selected, channels 1 to 135 are available
in Digital Mode and channels 1 to 125 are available in
Analog Mode.
When Antenna is selected, channels 2 to 69 are
available for both Digital and Analog Modes.
When you are in Digital Mode, channel numbers will be
displayed as 1-2, or 1-3 etc.
Whether you selected either Cable or Antenna mode,
both Digital and Analog channels will be installed.
11
SETUP
Go back
Auto Channel Search
Channel Edit & Name
Closed Caption
Favorite List
Language Eng.
Auto Vol. Level On
Format 4 : 3
MENU
CLEAR