Philips DS6800W-37 User Manual

Page 11

Tip

•

For some Wi-Fi routers, you may need to hold the
WPS button for Wi-Fi connection or enable the WPS
PBC function from the router conÀ guration pages. See
the user manuals of the speciÀ c routers for details.

•

If the Wi-Fi SETUP indicator on DS6800W blinks
yellow, it means that the Wi-Fi connection has failed.
Please wait for 2 minutes and try again. If the problem
remains, try to set up the Wi-Fi connection manually
(see 'Scenario 2: Connect to a non-WPS router' on
page 12 ) .

•

If the Wi-Fi connection fails again, press and hold on
the main speaker to reset it, and then try again.

Scenario 2: Connect to a
non-WPS router

Note

•

You can also follow the procedures below to connect
DS6800W to a WPS router manually.

To connect DS6800W to a Wi-Fi router
manually, you need access to DS6800W's
built-in conÀ guration web page for change of
its internal Wi-Fi settings. To do so, you need a
Wi-Fi enabled device with an Internet browser

WI-FI

SETUP

for temporary Wi-Fi connection to DS6800W.
The Wi-Fi enabled device can be an iPod touch/
iPhone/iPad or a Wi-Fi enabled PC/Mac.

Follow the sequence below for connection of
DS6800W to a non-WPS Wi-Fi router.

Collect settings of your home Wi-Fi router
and write down on paper for use during
DS6800W Wi-Fi setup (see 'Collect
settings of your home Wi-Fi router' on
page 10 ) .

Switch DS6800W to Assisted Wi-Fi Setup
mode (see 'Switch DS6800W to Assisted
Wi-Fi Setup mode' on page 11 ) .

» A new Wi-Fi network created by

DS6800W will appear, with the
network name (SSID) of Philips Fidelio
AirPlay .

Connect your Wi-Fi enabled device to the
created new Wi-Fi network temporarily
(see 'Connect your Wi-Fi enabled device
to the newly created Wi-Fi network' on
page 11 ) .

Open the built-in web page of DS6800W
with the Internet Browser of your Wi-Fi
enabled device (see 'Open the built-in web
page of DS6800W' on page 13 ) .

Change the internal Wi-Fi settings of
DS6800W based on the settings you
wrote on paper at step 1 (see 'Change the
internal Wi-Fi settings of DS6800W' on
page 14 ) .

Restore your Wi-Fi enabled device back
to your existing home Wi-Fi settings (see
'Restore your Wi-Fi enabled device back
to your existing home Wi-Fi setting' on
page 14 ) .

Collect settings of your home Wi-Fi
router

Note

•

Always consult the user manual of your home Wi-Fi
router for detailed instructions.

DS6800W_37_UM_Book.indb 10

2011-9-14 10:53:28