Philips SDV2730-27 - Manual (Page 4)

4
3.2 Connect to your TV
1
Connect one end of the coaxial cable to
signal output of the antenna and the other
end to the input on your TV receiver.
1
2
Connect DC plug to the antenna and the
power supply to a 120V AC outlet.
2
4 Using your indoor
television antenna
4.1 For VHF reception
1
Extend the telescoping dipoles to the
longest possible length.
3
2
Turn your TV to the desired channel. Adjust
the dipoles by moving in different directions
up and down, until reception is achieved.
3
3
Turn on the amplifier by rotating the gain
control knob towards the max position until
better reception is achieved.
4
D Note
You may need to turn the gain control down to
a lower setting for best reception.
4.2 For UHF reception
1
Turn your TV to the desired channel.
2
Position antenna toward transmitter until
reception is achieved.
3
Turn on the amplifier by rotating the gain
control knob towards the max position until
reception is improved.
D Note
You may need to turn the gain control down to
a lower setting for best reception.
E Tip
This antenna can be placed on a vertical
A
and horizontal
B orientation to extend
reception choices.
5
6V 100mA
2
ANT.
TV
OUTPUT
1
3
MAX. MIN.
4
M AX
.
MIN.
6V 100m
A
OUTPUT
MAX. MIN.
6V 100mA OUTPUT
5
-or-
A B
2730_27.indb 4 5/6/08 3:56:55 PM