Philips HD8751-47 - Manual (Page 42)

40 ENGLISH
9 Press the “ ” button to start the descaling cycle.
Red
Red
10 The machine will start dispensing the descaling solution at regular
intervals. The bar on the display shows the cycle progress.
Note:
The descaling cycle may be paused by pressing the “ ” button.To resume
the cycle, press the “ ” button again. This allows you to empty the container
or to leave the machine unattended for a short time.
Red
11 When this icon is displayed, the water tank is empty.
Red
Red
CALC
CLEAN
. . . .
CALC
CLEAN
. . . .
12 Remove the water tank, rinse it and fi ll it up to the MAX level with fresh
water. Place it back into the machine.
13 Empty the drip tray and place it back.
14 Empty the container and place it back under both the steam/hot water
wand and the dispensing spout.
Red
15 When inserting the water tank into the machine, this icon is displayed.
Press the “ ” button to start the rinse cycle.
16 When this icon is displayed, the water tank is empty. Repeat steps 12 to
15. Then continue with step 17.