Philips CCA134AT - Manual (Page 21)

• Although the remote control that
comes with your TV/VCR will work
most Cable Boxes and DBSs, it is
possible that the remote control will
not operate your Cable Box or DBS.
• The remote control may only oper-
ate some features of your Cable
Box or DBS. For example, some
Cable Boxes may only be turned on
at the Cable Box, therefore the
remote control will not be able to
turn on the Cable Box.
• If you can not change the channels
at the Cable Box by using the
Number buttons, press the
CABLE/DBS button before you press
the Number buttons. It may change
channels at the Cable Box.
• If you had to program the remote
control to operate your Cable Box
or DBS here, whenever you replace
the batteries in the remote control,
you will have to program the
remote control again.
Helpful Hints
5
Within 30 seconds, press the Number buttons to enter
the two-digit code for your Cable Box/DBS. For example, if
you have a Zenith Cable Box, press Number buttons 2, 3.
6
Repeat step 1. If the remote control works your Cable
Box/DBS, you’re finished. If the remote control still doesn’t work
your Cable Box/DBS, repeat steps 2-5, using a different code for
your brand, if available.
There is no guarantee
that the remote control
will work your Cable
Box or DBS.
Setting the Remote to Operate a Cable Box/DBS (cont’d) 21
VAR.SLOW
CABLE/DBS COMBI
VOL.
CH.
A.CH
3
6
9
0
2
5
8
1
4
7
TRACKING F.ADV
SLEEP/WAKE UP
REC/OTR
POWER
SPEED
STATUS/EXIT
STOP
PLAY
F.FWD REW
MEMORY
SLOW
MUTE
VCR PLUS+
/ENTER
SMART
PICTURE
SKIP
SEARCH
INDEX
SEARCH
EJECT
MENU CLEAR
PAUSE/STILL
5
6