Philips 24PT6341-37E - Manual (Page 25)

25
T here may come a time when you want to
Block All the television’s channels. Maybe
you don’t want your children to watch TV for
a given time. With the Block All control, ALL
available channels (including the A/V Inputs)
can be set to block at the same time.
1 Press the MENU button on the
remote to show the on-screen menu.
2 Press the CURSOR UP
▲ or DOWN
▼ button until the word FEATURES
is highlighted.
3 Press the CURSOR RIGHT © but-
ton to display the FEATURES menu
options.
4 Press the CURSOR UP
▲ or DOWN
▼ button until the words AutoLock
are highlighted.
5 Press the CURSOR RIGHT © but-
ton.
6 Enter the correct access code num-
ber. “XXXX” shows on the Access
Code display as you press the NUM-
BERED buttons. AutoLock menu
options will be displayed.
7 Press the CURSOR UP
▲ or DOWN
▼ buttons until the words BLOCK
ALL are highlighted.
8 Press the CURSOR RIGHT © but-
ton to turn Block All ON or OFF.
When ON is selected, ALL available
channels will be blocked.
9 When finished, press the
STATUS/EXIT button to remove the
menu from the screen.
H
OW TO
B
LOCK
A
LL
C
HANNELS AT THE
S
AME
T
IME
If you tune to a blocked channel and enter
your Access Code to view the channel, ALL
blocked channels will be viewable until the
TV has been turned off. When the TV is
powered back ON, the previously blocked
channels will be blocked again.
H
ELPFUL
H
INT
NOTE: The 0,7,1,1 access code shown
on this page is the default code or a
way to reset the code when the current
access code is not known.
Enter your Access Code to
view a tuned channel that is
blocked with Block Channel.