Philips Internet-DECT phone VOIP8411B - Manual

What’s in the box
What eelse w will yyou nneed
Handset Charger
Power supply for base
Quick start
guide Belt clip
●
Internet connection (high speed
Internet connection)
●
A Skype account
●
Internet connection with an
ADSL/Cable modem router or a
router connected to an ADSL/Cable
modem. Need at least one Ethernet
LAN plug available.
1 Connect
Connect the Ethernet cable
●
Connect one end of the Ethernet
cable to the Ethernet socket on
the side of the base unit.
●
Connect the other end of the
ethernet cable to an available
ethernet LAN plug of your
ADSL/modem (or a router
connected to Internet).
2 Install
Insert batteries
A
●
Place the 2 rechargeable NiMH
AAA batteries, observing their
polarities, into the battery
compartment on the handset.
●
Slide the battery door firmly into
place.
3111 285 32052
Battery door
Two 750mAh
AAA NiMH
batteries
Base station
Line cord
Charge handset
14
B
●
Before first use, put the handset
on the charger and charge
batteries for 14 hours.
Settings before first use C
At first start up, you will be asked
to set the language, accept an agree-
ment, select the country where the
phone is to be used and set the
area code.
Set the display language:
●
Scroll to the language you
want.
●
Press to confirm.
Review the agreement
●
Press (Up or Down) to scroll
through the agreement.
●
Press to accept the
agreement and proceed.
Accept
Select
A telephone line
Connect the line C
●
Connect the telephone line cord to
the phone socket on the side of the
base unit and the wall phone
socket.
Connect to main supply
●
Insert the plug of the base power
adapter into the socket on the
side of the base unit.
●
Plug the base power adapter into
your power outlet.
A
B
Power supply for
charger
Ethernet cable
(blue cable) User manual
on CD
Connect the charger D
●
Insert the plug of the charger
power adapter into the socket on
the bottom of the charger.
●
Plug the power adapter into your
power outlet.
Select your country:
●
Scroll to your country name.
If you don’t see your country name,
select “OTHERS” on the bottom of the
list and enter your international calling
code (i.e.“1” for Canada or “61” for
Australia), see section “8.10 Country
codes list” in the user manual.
●
Press to confirm.
Set your area code:
●
Enter the area code.
Area code is depending of the country,
if you are not using area code press
.
Use to correct typing
errors.
●
Press to confirm. OK
Clear
OK
Select
If using ADSL subcription, an
ADSL filter should be inserted
between the phone plug and the
wall socket.
QSG_VOIP841_USA mit Belt clip.qxd 20.01.2007 21:12 Seite 1