Brinkmann PROFESSIONAL STAINLESS STEEL Charcoal Grill User Manual

Page 8

Text mode
Original mode

Step 10

Rest lid on the body and align hinge
holes, then thread hood pivot pins
through hood and into grill body. Insert
cotter pins into hood pivot pins and bend
ends out slightly.

Step 11

Attach two air vent covers to the inside of
lid and body. Place air vent cover on the
inside of the unit with the adjustment tab
sticking through one of the air vent holes.
Using 6 x 12mm screw and nut, secure
vent cover to the unit. Do not overtighten
the nut as this will make the vent difficult
to open and close.

Step 12

Insert crank through front of grill body
and into crank bracket. Rotate clockwise
until crank engages charcoal grate.

Cotter Pin

Hood Pivot Pin

6 x 12mm

Phillips Hex Bolt

6 x 5mm Nut

INS_810-3214-S_ProGrill.qxd 5/30/07 4:56 PM Page 8