Blaupunkt CASABLANCA CD52 - Manual (Page 19)

46
Entering/altering CD names
➮
Listen to the desired CD.
➮
Press the MENU button
8
.
➮
Use the buttons
:
to select
“CD NAME”.
➮
Press the or button
:
twice.
You are now in the edit mode. If the CD
you have selected is still unnamed, eight
underlines appear on the display.
The current input position flashes.
➮
Use the buttons
:
to select
your characters. If a position is left
blank, you have selected the un-
derline.
➮
Use the or button
:
to pro-
ceed to your next input position.
➮
Press the MENU button
8
or OK
;
to save the name entered.
Clearing a CD name
➮
Listen to the CD whose name you
wish to clear.
➮
Press the MENU button
8
.
➮
Use the buttons
:
to select
“CD NAME”.
➮
Press the or button
:
.
➮
Hold down the MENU button
8
. A
beep sounds at the end of four sec-
onds and “DELETE NAME” ap-
pears on the display.
➮
Release the MENU button
8
.
The CD name is now deleted.
➮
Press the OK button
;
to return to
the menu.
Displaying CD text
Some CDs feature so-called CD text.
The CD text may include the name of
the performer, the album and the track
name.
You can have the CD text displayed as
running text at every change of track.
After the CD text has been displayed
once, the standard display is used.
Please see the section “Changing the
display”. If the CD in the player contains
no CD text, “NO TEXT” will appear on
the display when the CD text function is
activated.
Switching CD text on/off
➮
Press the MENU button
8
.
➮
Press the button
:
repeatedly
until “CD TEXT” appears on the
display.
➮
Switch on the CD text function by
pressing the
buttons
:
(“CD TEXT ON”) or off (“CD TEXT
OFF”).
➮
When you have completed the set-
ting procedure, press the MENU
button
8
or OK
;
.
Removing a CD
➮
Press the button
9
.
The flip/release panel opens to the front
and the CD is ejected.
➮
Carefully remove the CD and close
the flip/release panel.
CD MODE