Blaupunkt Acapulco MP54 - Manual (Page 41)

84
Adjusting the viewing angle
You can adjust the display’s viewing
angle to suit the installation position of
the device in your vehicle.
➮
Press the MENU button
9
.
➮
Press the or button
7
repeat-
edly until “DISPLAY MENU” ap-
pears in the display.
➮
Press the OK button
:
.
➮
Press the or button
7
repeat-
edly until “ANGLE” appears in the
display with the current setting.
➮
Press the or button
7
to ad-
just the viewing angle.
When you have finished making your
changes,
➮
press the MENU button
9
.
Setting the display illumination
colour (only Acapulco MP54)
When setting the display illumination,
you can choose one of four preset col-
ours or you can mix a colour yourself
from the RGB spectrum (red-green-
blue) or you can select a colour during
a colour scan.
Selecting a preset colour
Four different colours are already stored
in the device. “Ocean” (blue), “Amber”,
“Sunset” (red-orange) and “Nature”
(green) are available. Select a colour
that best suits your vehicle interior.
➮
Press the or button
7
repeat-
edly until “DISPLAY MENU” ap-
pears in the display.
➮
Press the OK button
:
.
➮
Press the or button
7
repeat-
edly until “DISPLAY COLOR” ap-
pears in the display.
➮
Press the OK button
:
.
➮
Press the or button
7
repeat-
edly until the colour that you want
is displayed.
When you have finished making your
changes,
➮
press the OK
:
button and then
the MENU button
9
.
The settings are saved.
Mixing a colour for the display
illumination
To customise the display illumination to
suit your tastes you can mix a colour
yourself using the three primary colours
red, blue and green.
➮
Press the or button
7
repeat-
edly until “DISPLAY MENU” ap-
pears in the display.
➮
Press the OK button
:
.
➮
Press the or button
7
repeat-
edly until “DISPLAY COLOR” ap-
pears in the display.
➮
Press the OK button
:
.
➮
Press the or button
7
repeat-
edly until “USER COLOR” appears
in the display.
➮
Press the OK button
:
.
The menu for mixing your own colour is
displayed. The top line displays “R”, “G”
and “B” with the current values. The “R”
setting flashes.
ADJUSTING THE DISPLAY SETTINGS