Philips 278C4QHSN-00 - Manual (Page 6)

4
2. Setting up the monitor
2. Setting up the monitor
2.1 Installation
Package contents
VGA (optional) HDMI (optional) AC/DC Adapter
Note
Use only the AC/DC adapter model:
Philips ADS-65LSI-19-1 19065G
Install base stand
1. Place the monitor face down on a soft
and smooth surface to avoid scratching or
damaging the screen.
2. Hold the stand with both hands.
(1) Gently attach the stand to the VESA
mount area until the latch locks the
stand.
(2) Use your fingers to tighten the screw
located at the bottom of the base, and
secure the base to the stand tightly.
1
2