Philips SPA4270BT-37 - Manual (Page 8)

6 EN
3 Play
Play through Bluetooth
The multimedia speaker uses Bluetooth
wireless technology to stream music from
your portable device to the system.
Note
• Your Bluetooth device should be with Bluetooth
software of version 2.1 or above.
•
Before you connect a Bluetooth device to this
multimedia speaker, familiarize yourself with the
Bluetooth capabilities of the device.
•
Keep this multimedia speaker away from other
electronic devices that may cause interference.
• Make sure that the multimedia speaker is installed
properly before using.
1
On the side panel of the right speaker,
rotate the VOL knob clockwise.
» Bluetooth will be activated
automatically.
» The LED indicator on the multimedia
speaker blinks.
• To switch off the speaker, rotate
the VOL knob counter-clockwise,
until you hear one click.
2
On your Bluetooth device, activate
Bluetooth and search for Philips
SPA4270BT.
• For the first-time connection, select
Philips SPA4270BT to start pairing.
» For some devices, you may need to
input “0000” as pairing password.
» If connection is successful, you will hear
double beep confirmation.
» The LED indicator lights in blue.
3
Play audio with the media player of your
device.
» The audio comes out through the
multimedia speaker.
» Next time you switch on Philips
SPA4270BT, the speaker connects to
the last paired device automatically.
» To connect Philips SPA4270BT to
another Bluetooth device, switch off
Bluetooth on current Bluetooth device.
Tip
• The effective operation range between the multimedia
speaker and the paired device is approximately 10
meters (30 feet).
•
Any obstacle between the speaker and the device can
reduce the operational range.
Play through the audio cable
Note
•
Make sure that the multimedia speaker is installed
properly before using.
You can also play music from an external
audio device, such as a computer,
mobile phone, MP3 player, etc.
1
Connect the 3.5mm audio in cable (fixed
to the AUX-IN socket on the right
speaker) to the headphone socket on the
external device.
» SPA4270BT exits Bluetooth pairing
mode when the audio cable is
connected to an external audio device.
2
On the side panel of the right speaker,
rotate the VOL knob clockwise.
» The LED indicator on the multimedia
speaker turns on stably.
3
Play music from the device.
• After use, rotate the VOL knob
counter-clockwise to switch off the
multimedia speaker and unplug.