Philips MZ3C-37L - Manual (Page 13)

13
MZ-3 / 37 page 13
English
Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes before
or during playback. The play modes can also be combined
with PROGRAM.
SHUFFLE . . . . . . . . . . tracks of the entire CD/ program are
played in random order
SHUFFLE and
REPEAT ALL . . . . . . . . to repeat the entire CD/ program
continuously in random order
REPEAT ALL . . . . . . . . repeats the entire CD/ program
continuously
REPEAT . . . . . . . . . . . repeats the current track
continuously
1 To select your play mode before or during playback,
press either:
• on the remote control SHUFFLE or REPEAT;
• on the set CLOCK repeatedly until the display shows the
desired function.
2 Press 2; to start playback if in the STOP position.
™ If you have selected SHUFFLE, playback starts
automatically.
3 To return to normal playback, press the respective
SHUFFLE or REPEAT button until the various SHUFFLE/
REPEAT modes are no longer displayed.
– You can also press
9 to cancel your play mode.
Programming track numbers
Program in the STOP position to select and store your CD
tracks in the desired sequence. If you like, store any track more
than once. Up to 40 tracks can be stored in the memory.
1 Press PROGRAM on the set or remote control to enter
the programming mode.
™ A track number is shown and
PROGRAM flashes.
2 Use the ¡1 or 2™ on the set, (on the remote control ¡
or ™) to select your desired track number.
3 Press PROGRAM to confirm the track to be stored.
™ The number of tracks programmed and total playing
time of the program is shown briefly, then the
selected track and PROG.
™ … : … is shown if total playing time is
100 minutes or more.
4 Repeat steps 2-3 to select and store all desired tracks.
™ FULL is displayed if you attempt to program more
than 40 tracks.
5 To start playback of your CD program, press 2; .
Reviewing the program
• In STOP mode, press and hold down PROGRAM on the
set or remote control, until the display shows all your
stored track numbers in sequence.
Erasing a program
You can erase the program by:
– pressing
9 once in the STOP position;
– pressing 9 twice during playback;
– opening the CD tray.
• CLEARED is shown briefly and PROGRAM disappears
from the display.
CD
SHUFFLE PROGRAM
DBB
IO IO
IO II
IO II
IO II
IO II IO IO I II
OPEN
CLOSE
PRESET
TUNING
MC 158 COMPACT A UDIO SYSTEM IO IO
IOII
IO II
IO II
IO II IO IO I II
OPEN
CLOSE
PRESET
TUNING
MC 158 COMPACT A UDIO SYSTEM
XP MZ-3 /37 01-02-2000 12:42 Pagina 13