Hyundai H-1415 - Manual (Page 5)

5
· Press the PROG button. PROG symbol is flashing on the display.
· Select a desired track by using the or buttons.
· Press PROG button to confirm. P02 on the display shows you that you now may store track2.
· Repeat steps described above to enter additional memories into the program if necessary.
· When all the desired tracks have been programmed, press PLAY/PAUSE button to play the disc in the order you have programmed.
Note:
· You can erase the contents of the memory by:
- opening the CD door
- selecting RADIO source
- pressing STOP button twice during playback or in the stop position.
Note: Good quality sound is guaranteed only when playing licensed CDR/CDRW discs.
Intro mode
Press INTRO button to listen to first 10 seconds of each track.
MP3 operation
· Set FUNCTION switch to CD/USB/SD position.
· Open the CD door by pressing on the PUSH OPEN field. Put a MP3 into the CD compartment with the label side upwards and close the CD door.
· In MP3 playback mode all functions are available as in CD operation mode.
Note: Good quality sound is guaranteed only when playing licensed MP3 discs.
USB / SD-MMC flash memory playback
· Slide the FUNCTION selector to CD/USB/SD position.
· Press and hold the PLAY/PAUSE button for 2 sec.
· Plug in USB Memory Stick into USB Port or insert a SD or MMC card with label facing up into the card slot.
· The display will show either USB or SD and total track number.
· Press PLAY/PAUSE to start music playing.
· Press the or to select tracks.
· Repeat function can be selected identical to CD/MP3 playback.
· Press STOP to end playback.
Note: Due to fast changing IT technology, this unit may not be compatible with some USB or SD/MMC flash storage device.