Philips AZ2200-17 - Manual (Page 9)

English
RADIO CD PLAYER
11
RADIO RECEPTION
1. Press POWER to on position.
2. Press TUNER source button.
– The TUNER indicator lights up.
3. Adjust BAND to select the desired FM/ AM waveband.
4. Tune to a radio station using the tuning knob.
– For FM, pull out the telescopic antenna. Incline and turn the
antenna. Reduce its length if the signal is too strong (very
close to a transmitter).
– For AM, the set is provided with a built-in antenna so the
telescopic antenna is not needed. Direct the antenna by
turning the whole set.
5. Adjust the sound using VOLUME and DBB.
6. Press POWER again to switch off the set.
– The TUNER indicator goes out.
DISPLAY INDICATION FOR CD FUNCTIONS
CD door open
d1SC CD inserted
– In stop mode total track number and total playback time
– During CD
playback elapsed playback time of current track and
current track number
– PAUSE elapsed playback time freezes and flashes
when CD program active;
also appears briefly when you store a track
no SEL program activated but no tracks selected
program cancelled/ PROG pressed for more
than 2 seconds
no d1SC no disc/error in CD operation or with the
CD (see Troubleshooting)
FULL program memory full
– SHUFFLE/ REPEAT
modes when the respective mode is activated
CD
CD
SHUFFLE
CD REPEAT
AZ 2200 /17 page 11
SHUFFLE
CD REPEAT
AZ2200 CD RADIO C ASSETTE RECORD ER
TUNER
SHUFFLE
REPEAT
CD
STOP
SEARCH
PLAY/PAUSE
TAPE PROG
BB
AZ2200 CD RADIO CASSETTE REC
ORDE
TUNER
SHUFFLE
POWER
CD
DBB
XP AZ 2200/17 19-09-2000 15:05 Pagina 11