Philips AVENT Digital Video Baby Monitor SCD603-10 2.4" color screen - Manual (Page 5)

5
2
Insert the rechargeable battery.
D Note:
Make sure the + and - poles point in the right
direction.
3
Reattach the lid.
4
Insert the appliance plug into the parent unit
and insert the adapter into an electrical outlet.
• The battery/power-on light on the parent
unit lights up green and the animated
battery charging image appears at the top
of the video display.
3.2 Parent unit
3.2.1 Operation on rechargeable battery
B Warning:
Unplug the parent unit and make sure your
hands and the unit are dry when you insert the
rechargeable battery.
• The parent unit comes with a rechargeable
Li-ion polymer 1100mAh battery.
• Charge the parent unit before you use it
for the first time or when the parent unit
indicates that the battery is low.
• The battery is low when the empty battery
symbol flashes on the video display and the
battery/power-on light on the parent unit
flashes red.
D Note:
If the battery is completely empty, the parent unit
automatically turns off and loses contact with the
baby unit.
1
Slide down the battery compartment lid to
remove it.
ENGLISH