Philips FWP750 - Manual (Page 20)

20
English
3139 115 20621
To erase the entire program
● Press Ç once when playback is stopped or
twice during playback.
➜ "PROGRAM CLEARED" will be displayed.
➜
PROG will disappear from the display.
Note:
– The program will be erased when the system is
disconnected from the power supply or when the
disc tray is opened.
Repeat
The current track, a disc, all available discs or all
programmed tracks can be played repeatedly.
1 Press REPEAT on the remote control
repeatedly to select various repeat modes.
● In normal playback
➜ "TRACK" – to repeat the current track.
"
DISC" – to repeat the entire disc.
" ALL DISC" – to repeat all available discs.
➜
RPT appears on the display.
● In program playback
➜ "TRACK" – to repeat the current
programmed track.
"
PROGRAM" – to repeat all programmed
tracks.
➜
RPT and PROG will appear on the display.
● The selected track/disc(s)/program will now be
played repeatedly until you press Ç.
2 To resume normal playback, press REPEAT
until the "
OFF" mode is displayed.
➜
RPT will disappear from the display.
Note:
– Selecting SHUFFLE during repeat playback will
cancel all repeat modes.
CD Operation
Shuffle
All the available discs and their tracks or all the
programmed tracks can be played in random
order.
1 Press SHUFFLE on the remote control.
➜ "SHUFFLE" and
SHUFF will appear on the
display.
● The discs and the tracks will be played in
random order until you press Ç.
2 To resume normal playback, press SHUFFLE
again.
➜
SHUFF will disappear from the display.
When you select REPEAT mode during
shuffling
● In normal shuffled playback
➜ "TRACK" and "ALL DISC" repeat modes are
available for selection.
➜
RPT and SHUFF will appear on the
display.
● In program shuffled playback
➜ "TRACK" or "PROGRAM" repeat modes are
available for selection.
➜
RPT , SHUFF and PROG will appear on the
display.
For Recording, please refer to “Tape
Operation/Recording”.
pg 001-031/P750/37-Eng 3/7/01, 4:12 PM 20