2 use your dvd player, Basic play control, Video options – Philips DVP2880-F7 User Manual
Page 9: Control photo play, Repeat play, Skip play, Use philips easylink
9
English
EN
Video options
During video play, press OPTIONS to
access the following options.
• [Info]: Display the current play information.
• [PBC]: Display or skip the content menu
for VCD and SVCD.
• [Aspect ratio]: Select a picture display
format to fit the TV screen.
• [Volume]: Change a volume level.
• [Angle]: Select a camera angle from which
video is viewed.
Control photo play
During photo play, use the remote control to
control the play.
Button
Action
Rotate a picture horizontally/
vertically.
/
Rotate a picture anti-clockwise/
clockwise.
OPTIONS
Access to select [Color] to
display a picture in color or black
and white.
Access to select [Photo preview]
to display pictures in thumbnail.
Zoom in or out of a photo.
Play pauses in zoom mode.
OK
Start or resume a play.
Stop a play.
Repeat play
During play, press REPEAT/REPEAT A-B
repeatedly to select a repeat play option.
• Repeat the current title, chapter, or track.
• Repeat all the contents on a disc.
• Repeat play for a specific section.
To Repeat play for a specific section
1
Press REPEAT/REPEAT A-B repeatedly to
select
as a start point.
2
Press REPEAT/REPEAT A-B again to select
as an end point.
»
The repeat play of the marked section
starts.
3
To cancel repeat play, press REPEAT/
REPEAT A-B until [Off] is displayed.
Note
•
Repeat play of the marked section is only possible
within a title or track.
Skip play
You can skip play to a specific title, chapter or
track.
1
During play, press GOTO.
»
An input field bar is displayed, and "0"
blinks.
2
Press to select a digit as a title,
chapter, or track number.
3
After a digit is selected, press / to
change a digit position.
4
If necessary, repeat step 2 and 3 to
complete the input of a title, chapter, or
track number.
5
Press OK.
»
The play skips to the selected title,
chapter or track.
Use Philips EasyLink
This player supports Philips EasyLink which
uses the HDMI CEC (Consumer Electronics
Control) protocol. You can use a single remote
control to control EasyLink compliant devices
that are connected through HDMI. Philips does
not guarantee 100% interoperability with all
HDMI CEC devices.
DVP2880_F7_UM_V1.0.indb 9
2013/1/11 15:00:24