Philips VP115CAT99 - Manual (Page 8)

8 Hookups With a Cable Box
This connection allows you to view any channel. You must select channels at the Cable Box.
ANTENNA IN Jack
Back of TV
(example only)
1. Connect the Cable
signal to the IN Jack
on the Cable Box.
3. Use a second RF coaxial
cable to connect the
ANT(enna) OUT jack on
the VCP to the TV’s
ANTENNA IN Jack.
Watching TV with the VCP Off
1
Turn off the VCP power.
2
Turn on the TV and set it to the Cable Box output channel
(channel 3 or 4).
3
Turn on the Cable Box and select the channel you want to
watch at the Cable Box. You can not select channels at the
TV.
Playing a Tape
1
Set the TV to channel 3 or 4, whichever channel the
CH3/CH4 switch on the VCP is set to.
2
Turn on the VCP or insert a tape, if necessary. Press the
PLAY button to play the tape. Details are on page 16.
2. Use the RF coaxial cable
(supplied) to connect the
OUT Jack on the Cable
Box to the ANT(enna) IN
Jack on the VCP.