Philips 190P7EB-27 User Manual

Page 61

Setting up and Connecting Your Monitor

Connect the cables to the back of your computer by following these steps:

(a)

Turn off your computer and unplug its power cord.

(b)

Connect the monitor signal cable to the video connector on the back of your computer.

(c)

Plug the power cord on your computer and your monitor into a nearby outlet.

(d)

USB plug

(1)

Connect USB upstream port on monitor and the USB port on PC with a USB cable.

(2)

The USB downstream port is now ready for any USB device to plug in

(e)

Turn on your computer and monitor. If the monitor displays an image, installation is complete.

Note:

The USB plug is a pass through connection whether it can support USB 1.1 or

USB 2.0 depends on your PC's specification.

file:///F|/lcd/manual/ENGLISH/190P7/install/connect.htm（第 2／2 页）2006-11-30 15:34:25