beautypg.com

Philips 19" ITV Card w-NET 1 User Manual

Page 10

background image

3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL

10

H

OW

T

O

U

SE

T

HE

O

N

-S

CREEN

M

ENU

(C

ONTINUED

)

WELCOME MESSAGE* (>)

SETUP x CONSUMER

FEATURES MENU

_

Applicable / available only to the Commercial Mode / setup menu. The Welcome Message feature makes it possible for
an on-screen message to appear whenever the television is first turned on. The message will remain until any front-panel
keyboard command or remote control command is received. The Welcome Message sub-menu is shown below.

Use cursor-up and cursor-down to select the Welcome Message sub-menu item. While Line 1 or Line 2 of the Welcome
Message message is highlighted, use cursor-left and cursor-right to enter message-edit mode and position the cursor with-
in the line of the message content. Use cursor-up and cursor-down to change the character at the current position. Press
RECALL on the Setup Remote to exit the editing mode and resume Welcome Message sub-menu item selection.

> NOTE: WELCOME MESSAGE, when ON, overrides CHANNEL GUIDE at power-on, if the latter has been enabled.

* COMMERCIAL FEATURE

CHANNEL GUIDE* (OFF / ON / POWER ON)

SETUP x CONSUMER

FEATURES MENU

_

Applicable / available only to the Commercial Mode / setup menu. CHANNEL GUIDE provides an on-screen list of all
channels / inputs currently saved in the channel ring (see CHANNEL INSTALL) and their corresponding labels (see
CHANNEL INSTALL), for any channels / inputs for which labels have been assigned. When CHANNEL GUIDE is ON,
the channel guide appears when a remote control CH GDE command is received. When CHANNEL GUIDE is set to
POWER ON, the channel guide appears when the television is first powered on, as well as when a remote control CH
GDE command is received. When CHANNEL GUIDE is OFF, the channel guide never appears.

REMINDER* (OFF / ON)

SETUP x CONSUMER

FEATURES MENU

_

The REMINDER feature, when ON, causes the television to constantly display the currently-tuned channel / input and/or
its label (if one has been assigned, see CHANNEL INSTALLATION) in the upper-left-hand corner of the screen. When
REMINDER is OFF, the channel number / label will only appear briefly immediately after channel / input is selected.

NOTE: The REMINDER feature is available in the television’s commercial-mode TV SETUP and CONSUMER menus.

3-DIGIT ENTRY* (OFF / ON)

SETUP x CONSUMER

FEATURES MENU

_

Applicable / available only to the Commercial Mode / setup menu. Determines whether two or three remote-control digit
commands initiate a channel-tune command. When OFF, tuning will occur upon the reception of two remote-control digit
commands. When ON, tuning will occur upon the reception of three remote-control digit commands.

WELCOME MESSAGE

MESSAGE

OFF / ON

LINE 1

(20 characters)

LINE 2

(20 characters)

CLEAR

>

EXIT

>

This manual is related to the following products: