Philips MCW770-37 - Manual

1
English
Quick Use Guide
MC W770
Open the battery compartment of the remote control and insert
2 alkaline batteries, type AA (R06, UM-3).
1 Connect the speaker cables to the MC W770.
Use the supplied speakers only. Using other speakers
can damage the set or the sound quality will be
negatively affected.
2 Connect the AM/MW antenna.
3 Connect the FM antenna.
4 If you want to connect an additional appliance, use a cinch
cable to connect the audio inputs of the MC W770 to the
audio outputs of the additional appliance.
5 Check whether the mains voltage as shown on
the type plate corresponds to your local mains
voltage. If it does not, consult your dealer or
service organisation.
Make sure all connections have been made
before switching on the mains supply.
Connect the AC power cord supplied to
AC MAINS ~ and to the wall socket.
Supplied accessories
1
Insert batteries
2
Connect speakers, antennas, an additional appliance (optional)
and the AC power cord
– PC link software installer CD-ROM
– Wireless USB adapter and extension cable
– Remote control and 2 batteries, size AA
– 2 loudspeaker boxes including
2 speaker cables
– AM/MW loop antenna
– FM wire antenna
– AC power cord
This Quick Use Guide gives a rough
overview and helps to start quickly with
basic steps. Please read the supplied
instruction manual for detailed
information.
MC-W770 QUG/22.1 eng 8/23/01 10:45 Page 1