Philips SPS6060A-17 - Manual (Page 7)

7
7
Press CLOCK to quit the program setting.
» The programs are saved.
» The current time is displayed.
Tip
• At most seven programs can be preset by all days of
the weeks, any single day of the week weekdays only or
weekends only. The saved programs take effect at the
same time.
• In case one program contradicts another one, the
OFF program will be prior to take effect. For instance,
Program 1 is OFF from 08:00 to 17:00 on SA SU, while
Program 2 is ON from 00:00 to 24:00 on SA, then the
outlets will be off on SA from 08:00 to 17:00.
Review the program
1
Press PROG repeatedly to check each
program.
2
Press CLOCK to quit the program review.
Cancel the program
1
Press PROG repeatedly to locate the
program you want to cancel.
2
Press and hold MODE, and press PROG to
cancel the program.
5 Set the program
You can set programs to control the electric
appliances with this power strip.
1
Press PROG, the following is displayed.
2
Press DAY repeatedly to select the desired
day on which the output turns on.
3
Press HOUR and MIN repeatedly to select
the desired time when the output turns on.
4
Press PROG again to confirm the setting.
5
Repeat step 2 to step 4 to select the
desired day and time when the output
turns off.
6
Repeat step 1 to step 5 to set more
programs.
AM
PM
ON
OFF
RDM
AUTO
AM
PM
ON
OFF
RDM
AUTO
AM
PM
ON
OFF
RDM
AUTO
English
EN