beautypg.com

Troubleshooting, Specifications, Problem solution – Philips MC120 User Manual

Page 20

background image

20

English

3140 115 30091

Troubleshooting

WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or service center.

Problem

Solution

CD OPERATION

NO DISC” is displayed.

Insert a disc.

Check if the disc is inserted upside down.

Wait until the moisture condensation at the lens
has cleared.

Replace or clean the disc, see “Maintenance”.

Use a finalized CD-RW or CD-R.

Specifications

AMPLIFIER
Output power .......................................... 2 x 5 W RMS

................................................................. 10 W total power

Signal-to-noise ratio ..........................

≥ 65 dBA (IEC)

Frequency response ......... 40 – 20000 Hz,

± 3 dB

Input sensitivity AUX ....................... 0.5 V (max. 2 V)
Impedance loudspeakers ......................................... 8

Impedance headphones .................... 32

Ω -1000 Ω

CD PLAYER
Frequency range .................................. 20 – 20000 Hz
Signal-to-noise ratio ............................................ 75 dBA

TUNER
FM wave range ................................... 87.5 – 108 MHz
AM wave range .................................. 530 – 1700 kHz
Sensitivity at 75

– mono, 26 dB signal-to-noise ratio ............ 2.8

µV

– stereo, 46 dB signal-to-noise ratio ........ 61.4

µV

Selectivity .................................................................

≥ 28 dB

Total harmonic distortion .....................................

≤ 5%

Frequency response ..... 63 – 12500 Hz (

± 3 dB)

Signal-to-noise-ratio ......................................

≥ 50 dBA

TAPE DECK
Frequency response

Normal tape (type I) ... 120 – 10000 Hz (8 dB)

Signal-to-noise ratio

Normal tape (type I) .................................... 48 dBA

Wow and flutter .........................................

≤ 0.4% DIN

SPEAKERS
Bass reflex system
Dimensions (w x h x d) . 140 x 231 x 202 (mm)

........................................................... 5.5 x 9.1 x 8.0 (inch)

GENERAL INFORMATION
AC Power ................................................... 120 V / 60 Hz
Dimensions (w x h x d) .. 140 x 231 x 280 (mm)

........................................................ 5.5 x 9.1 x 11.0 (inch)

Weight (with/without speakers) ..................................

............................................................... approx. 5.7 / 2.7 kg
....................................................... approx. 12.6 / 6.0 (Lb)

Standby power consumption .......................... < 3 W

Subject to modification