Philips 109B60-27 - Manual (Page 28)

Frequently Asked Questions
10. How do I enable the energy saving function?
Go to 'My Computer' and select 'Control Panel' followed by 'Monitor Control.' Select "All
default selection' and choose your Philips monitor model from the default driver list. Plug and
Play will automatically enable the EPA tick box for you. In DOS or Windows 3.1, you must
first make sure your PC supports power saving.
11. What is refresh rate?
"Refresh rate" describes the number of times an entire screen is vertically scanned each second. In
other words: If a monitor's refresh rate is 85 Hz, its screen is refreshed - or vertically scanned - 85 times
per second. A higher the refresh rate means better image stability and less flicker. A high refresh rate
helps users who work long hours in front of a monitor avoid eye fatigue and stress. To change the
refresh rate, go into "Start/Settings / Control Pannel / Display / Properties / Setting/Advance/Adaptor"
Windows settings of the computer, the monitor will automatically adjust itself to the video card.
12. Why does the picture on the screen appear to flicker?
A low refresh rate or electrical interference typically causes flickering in the picture. Possible solutions
include the following:
●
Verify that the proper drivers are installed for your video card
●
Make sure that all electrical devices (such as mobile phones) are at least 1m from the
monitor
●
Place the monitor in another physical location away from electrical interference
●
Adjust the refresh rate to 75hz or higher.
13. How do I adjust my monitor's resolution?
file:///D|/EDFU/crt_19_6/edoc/english/faq.htm (4 of 15)2005-08-10 ¤U¤И 01:03:23