Connect, Set up, Aux 1 aux 2 video in (cvbs) – Philips HTS3565D-37B User Manual
Page 2: Aux 1 aux 2, Aux 2 aux 1, Aux 1 aux 2 audio out audio in, Audio out
1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
FRONT
RIGHT
FRONT
LEFT
CENTER
REAR
RIGHT
REAR
LEFT
SUBWOOFER
* Tallboy rear speakers for HTS3566D model.
A
Place the center speaker above or close to the TV.
B
Place the subwoofer on the floor, at least one meter
away from the TV.
C
Place the front speakers at equal distances from the
TV.
D
Place the rear speakers at normal listening ear level.
B
Connect the main unit to TV
AUX 1
AUX 2
VIDEO IN
(CVBS)
VIDEO IN
(CVBS)
z
Use the supplied composite video cable to connect
the CVBS jack on the main unit to the VIDEO IN
jack on your TV.
Note It is important to connect the main unit
directly to your TV.
2
Set up
C
Assemble the tallboy speakers
(for HTS3566D only)
A
B
C
A
Connect the speaker cables to the matching colour
sockets on the speakers (or speaker stands).
B
Place the stands upright and lock the speakers down
into position.
C
Secure the position with screws (supplied).
D
Connect the speakers and
subwoofer
Connect the various colored cables from the speakers
and subwoofer to the same colored jacks at the rear of
the main unit.
AUX 1
AUX 2
Main Unit (rear)
A
Finding the viewing channel
A
Press 2 on the main unit to turn it on.
B
Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
°
button) until
you see the Video In channel. If you are using a RF
modulator, set the TV to channel 3 or 4.
B
Select the display language on the
screen
A
Press OPTIONS.
The { General Setup } appears.
B
Press .
Press OPTIONS to exit menu
General Setup
Auto
Français
Espanõl
Disc Lock
Display Dim
OSD Language
Screen Saver
DivX(R) VOD Code
Sleep
English
C
Use
keys to select { OSD Language } in the
menu, then press
.
D
Use
keys to select a language and press OK to
confirm.
E
Press OPTIONS to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theater system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preferences) available on this Home Theater
System. Refer to the user manual for more information.
E
Connect the radio antenna and
power cable
Keep the antenna away from the electronic devices to
prevent unwanted interference.
AUX 2
AUX 1
B
A
A
Connect the FM antenna (supplied) to the inner pin
of the FM 75 jack. (For some models, it has been
connected in the factory.) Extend the wire for
optimum reception.
B
Connect in the power cable from the main unit to
the AC power outlet.
F
Connect audio output from TV
(optional)
To hear the TV audio through this unit, use a red and
white audio cables (not supplied) to connect the AUDIO
IN-AUX1 or AUDIO IN-AUX2 jacks on the main unit to
the AUDIO OUT jacks on your TV.
AUX 1
AUX 2
AUDIO
OUT
AUDIO IN
AUDIO
OUT
AUDIO OUT
AUX 2
Note When watching the TV programs, you can
press AUX (MP3 LINK) repeatedly on the remote
control until ‘AUX1’ or ‘AUX2’ is displayed to get the
sound output from the speakers.
Main Unit (rear)
Television
(rear)
Main Unit (rear)
Television
(rear)
Main Unit (rear)
FM antenna
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
FRONT CENTER
* Tallboy rear speakers for HTS3566D model.
Main Unit (Front)
1_hts3565-66D_37_qsg_eng2_final82 2
1_hts3565-66D_37_qsg_eng2_final82 2
2008-03-27 11:21:44 AM
2008-03-27 11:21:44 AM