Philips AT895-41 User Manual
Page 21
ENGLISH
C
5
Remove and clean one set of cutters and
combs at a time.
C
6
Separate the cutter from the comb and
clean it with the short bristled side of the
brush supplied.
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
C
7
Clean the inside and outside of the comb
with the brush supplied.
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Philips Norelco Shaving Head Cleaning Spray,
Model HQ110 or alcohol) and lubricated with
one drop of mineral oil (in the center of the head).
This helps prevent wear of the shaving heads.
C
8
Replace the set back into the Razor Head
Assembly.
Make sure that the two pointy edges of the head
fit exactly into the recesses.
9
Repeat the process for the other two sets
of cutters and combs.
21