Brinkmann Two Burner User Manual

Page 4

Step 1

Snap down legs to form a "V" with the stove
base.

Step 2

Open lid and align the two wind guards by
inserting notched support arms into wind
guards.

Step 3

Remove regulator/valve assembly.

Step 4

Before attaching propane cylinder, make
sure the regulator and burner control knobs
are in the "OFF" position.

Step 5

Attach propane cylinder to regulator/valve
assembly by turning propane cylinder
counter-clockwise. HAND TIGHTEN ONLY.

NOTE: Use propane cylinder upright when

possible to prevent flare-ups.

Step 6

Attach regulator/valve assembly to stove
fitting. HAND TIGHTEN ONLY.

Notched Support Arm

Regulator/ Valve Assembly

Regulator Knob

Burner Control Knobs

Stove Fitting

WARNING: Always snap down legs to form a "V" with the stove

base to prevent the stove from becoming unstable
while in use.